 |
| MBD-X7DWE -B |
X7DWE (Bulk Pack) |
| MBD-X7DWE -O |
X7DWE (Standard Retail Pack) |
| |
 |
| Dimensions |
12.05" x 10" (30.6cm x 25.4cm) |
| Form Factor |
ATX |
| |
 |
| CPU |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
| System Bus |
1600 / 1333 / 1066 MHz system bus |
| |
 |
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| Memory Capacity |
Four 240-pin DIMM sockets
Supports up to 32 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported |
| Memory Type |
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| Memory Voltage |
1.8 V or 1.5 V |
| |
 |
| Chipset |
Intel® 5400 (Seaburg) chipset
MCH + ESB2 |
| Clock Generator |
ICS 401 chip |
| Graphics |
XGI Z9S controller with 32 MB of video memory |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B(+))
(Optional: AOC-SIMLP-3(+)) with 3rd LAN support |
| Network Controllers |
Intel® 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking |
| SATA |
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux) |
| Super I/O |
Winbond 83627HF chip |
| |
 |
| Floppy |
1 Floppy controller; 1.44 MB |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| LAN |
2x RJ45 LAN ports |
| Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported |
| Serial Port / Header |
1 Fast UART 16550 serial port |
| USB |
2x RJ45 LAN ports
USB 2 rear + 1 Type A connector + 2 headers (4 Ports)
Total 7 USB 2.0 Compliant / 1.1 Compliant |
| VGA |
1x VGA Port |
|
 |
 |
| 2U Chassis |
SC825TQ-R700LP
SC825TQ-560LP
SC823T-550LP
|
| 3U Chassis |
SC836TQ-R800
SC836E2-R800
SC836E1-R800
SC833T-R760
SC833T-550
SC933E2-R760
SC933E1-R760
SC933T-R760
|
| Important Chassis Notes |
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| Tower / 4U Rackmount |
SC745TQ-R800
SC745TQ-700
SC743TQ-R760
SC743T-R760
SC743T-650
|
| |
 |
| PCI-Express |
4 (x8) PCI-Express (Gen 2.0)
1 (x4) PCI-Express (Using x8 slot)
|
| PCI-X |
1x 64-bit 133MHz PCI-X
|
| UIO |
1x UIO slots
|
| |
 |
| BIOS Features |
Plug and Play (PnP)
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
|
| BIOS Type |
8Mb Flash EEPROM with Phoenix® BIOS
|
| |
 |
| Environmental Spec. |
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| RoHS |
RoHS Compliant 5/6, Server Exemption
|
| |
 |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, VBAT, Chipset Voltages.
4 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of six 4-pin fan headers supporting up to 6 fans
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
| LED |
CPU / System Overheat LED
|
| Other Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
PECI
|
| |
 |
| Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
|
| Software |
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
Super Doctor III
Watch Dog
NMI
|
|